eSadar Instant Water Geyser
PLEASE DO NOT SWITCH ON ANY INSTANT GEYSER WITHOUT WATER IN ITS TANK DURING INSTALLATION. However, once used, you can switch it on without running water.
eSadar Instnat Water Geyser requires no additional plumbing, just put it on the water tap and enjoy continuous flow of hot water. Running hot water within 6 seconds of operation.
eSadar Instant Water Geyser can be used in bathroom, kitchen, wash area, hotels, hospital etc.
eSadar Instant Water Geyser is portable, easy to install, fit, affordable and compact.
eSadar Instant Water Geyser is fitted with ISI marked thermostat, ISI marked Coil, ISI marked power cable. Cable length is 1.5 meters, We provide 1 meter free PVC pipe and nozzle with geyser. Allow 5-10 minutes to fill up-to 20 liter bucket, reduce inflow of water from tap to increase temperature of outflow water.
What do you get
The size, shape and general design of the eSadar Instant Water Geyser is easier to hold and operate one-handed too. One could reach the other side of the geyser with one hand and with far less strain, and it required little to no shuffling in the hand to move around the whole geyser.
|eSadar Version||Better than other|
|Nozzle||Sleek Shower||not established|
|* Due to others reviews|
eSadar Instant water geyser is compact, very light weight, attractively designed and can easily shifted to any place where hot water required, it is handy to use and just need to hanged to be ready for operation. The best thing is, it does not required additional plumbing, just hang, connect to power and water tap, here is your hot water available. It is a perfect replacement for large size storage water geysers. It provides running hot water directly from the tap without storage.
eSadar Instant Water Geyser can be used in bathroom, kitchen, wash area, hotels, hospital etc. It consumes only 1 Unit of power consumption for 64 Liter of hot water. Auto power cut-off in case temperature reaches 65 degrees.
- Body – Polypropylene Plastic
- Thermostat – Copper, ISI marked
- Cable – White, 1.5 Meter, ISI marked
- Plug-top – 16 Amp, ISI marked
- Power – 1 Unit Consumption for ~70 liter of hot water
- Speed – Running hot water within 6 seconds
- Auto power cut-off – In case temperature reaches 65 degrees
- Awesome looks
- Gives hot water in around 5 seconds
- Stunning Compact
- It’s actually innovative
- Could be better priced
Specification: eSadar Instant Water Geyser
Black, Blue, Gray, White, Yellow
1 review for eSadar Instant Water Geyser